After connecting the PC to the TV, set the output signal from your PC according to the supported resolutions and timings indicated below. You can send stuff the other way, and mirror the screen of your smart device on the TV, though.For a fuller report on Sony’s latest Smart TV engine, check our previous in-depth article.Sony 42W653A — ConnectivityThe Sony 42W653A’s network features are delivered via built-in Wi-Fi or LAN connections. Yes No Voted Undo Score 2 Am confused on where to put the brown wire in Sony klv-40BX400 Yes No Voted Undo Score 1 My Sony TV blinks 7 times.
Not surprisingly, though, this means it comes with a few significant strings attached. The TV enters the standby mode automatically when the PC is connected to the TV and no signal has been output from the PC for more than 30 seconds. The power strip could be bad. ( ) It could also be a backlight problem of some sort. If you can view T.V. again, and want to see error codes, do the following: Turn T.V. off. Use the TV as a monitor for your PC by connecting an HD15-HD15 cable connection as shown below. Unplugging for 3 minutes did reset the picture. Quickly press «Display», «Channel 5», «Down Volume», then «Power». Press «Power» again if nothing came up on T.V. See error codes.