Supported camera recorders: P2 HD: AG-HPX300 series, AG-HPX500 series, AJ-HPX3700, AJ-HPX2700, AJ-HPX3000, AJ-HPX2000/2100 Please click here for a list of operation manuals to download. Page 91: Mounting And Adjusting The Lens, Mounting The Lens Mounting and Adjusting the Lens Mounting the Lens Lower the lens clamping lever to clamp the lens. They, are only slightly smaller at 1/4.1 inch (mixture of fractions and decimal by Panasonic). They have a slightly noticeable worse noise performance compared to the DX1 and SD1 but much better than the 1/6 inch 3CCD sensor camcorders.
The location of the connectors was revised, and the menu joystick was moved from the back of the camcorder to the left side, inside the LCD cavity. The HDC-SX5 and SD5 only featured standard stereo sound recording. Use the ND FILTER control to select a ﬁlter according to light conditions. Page 43: Recording Check Function, Shot Marker (shot Mark) Recording Function, Text Memo Recording Function Text Memo Recording Recording Check Function Function • Pressing the RET button on the lens in the CAMERA mode will automatically play back the last two seconds or so of latest clip. Page 114 Contents of P2 Card Status Display Total remaining memory capacity for all Settings cards • Displays the total remaining free space for all 4 Select PROPERTY → CARD STATUS. The following slots. screen appears. Page 112: Formatting P2 And Sd Memory Cards, Formatting A P2 Card, Formatting Sd Memory Cards Formatting P2 and SD Memory Cards Formatting SD memory Formatting a P2 Card cards Press the MODE button to enter the SD memory cards can also be formatted from the MCR mode. thumbnail screen.
Then access the site listed above to download a driver if necessary. Page 19 Shooting and Recording/Playback Functions Section Shooting and Recording (camera unit) AUTO W/B (white/black) BAL switch ND FILTER (ﬁlter switching) control Automatically adjusts the white balance. Insert the plate and slide it as shown below. Variants: AG-HMC40/AG-HMC40P/AG-HMC40U is a North American version, which supports only 60 Hz scanning. AG-HMC41/AG-HMC41E is a European version, which supports only 50 Hz scanning. AG-HMC45 is an Asian version, which supports only 60 Hz scanning.